PLATINIUM DIELÉCTRICA
- Waistband cut in FR fabric
- Pocket cut in FR fabric
- Type A reflective tape
- Polyamide-tooth zipper with aramid tape
- Polyamide snaps
Back to Uniforms 
Hover over the photo to zoom in
Hover over the photo to zoom inTechnical data sheet
Industrial coverall · PDVSA 2021 standard · Flame resistant
FIRE · COMFORT / PROTECTION FR fabrics with an ATPV value declared on the manufacturer’s data sheet, for operations exposed to flame or electric arc.
Fabric color
Request a quote The photos show the cut of the garment. The fabric is chosen from the table below: the same cut is made up in any of them.
On-screen colors are for reference only and may vary with the fabric batch.
Download data sheet Manufacturer PDF, with construction detail and the fabric tableConstruction
Construction detail as declared on the manufacturer’s technical data sheet.
- Long or short sleeve
- Six pockets, laid out as follows:
- Two chest pockets with flaps
- Two front trouser pockets
- Two rear patch pockets, no flap
- Two-tone design
- Mandarin collar
- Front zipper concealed under a flap for extra protection
- Silver-grey reflective tape, 1”, double on sleeves and legs and single on waist and shoulders
- Elastic adjustment at the rear of the waist
- Cuffs with snap adjustment
- Embroidered with two patch-type logos (left chest and left sleeve)
- Sewn with 3-ply thread for stronger seams
- Double stitching with bar tacks at the highest-stress areas
Finish levels
The same garment with different hardware and waistband/pocket fabrics. The level is chosen when quoting.
GOLDEN
- Waistband cut in FR fabric
- Pocket cut in FR fabric
- Type A reflective tape
- Flame-resistant metal zipper
- Antistatic snaps
SILVER
- Waistband cut in 100% cotton drill
- Pocket cut in 100% cotton drill
- Type A reflective tape
- Domestic metal zipper
- Domestic snaps
BRONCE
- Waistband cut in Norwegian/Borneo drill
- Pocket cut in sabana versátil fabric
- Type B reflective tape
- Domestic metal zipper
- Domestic snaps
Available fabrics
Values declared by the manufacturer on the garment’s technical data sheet.
| Line | Fabric | Weight | Composition | Shrinkage % | ATPV | HAF | Protection category |
|---|---|---|---|---|---|---|---|
| Armura Shield | Drill 100% Algodón Ignífugo | 240 G/M2 · 7 OZ/Y2 | 100% FR cotton | 3% warp · 3% weft | 8 CAL/CM2 | 71,27% | CAT 2 |
| Armura Shield | Drill 88% Algodón Ignífugo 12% Poliamida | 250 G/M2 · 7,5 OZ/Y2 | 88% FR cotton · 12% polyamide | 3% warp · 3% weft | 11 CAL/CM2 | 77% | CAT 2 |
| Armura Arc-Pro | Drill 99% Algodón Ignífugo 1% Fibra Antiestática | 260 G/M2 · 7,7 OZ/Y2 | 99% FR cotton · 1% antistatic | 1.8% warp · 1.9% weft | 11 CAL/CM2 | 81% | CAT 2 |
| Armura Shield | Nomex Synergy Pro | 230 G/M2 · 6,78 OZ/Y2 | 93% Nomex · 5% Kevlar · 2% carbon fibre | 3% warp · 3% weft | 8,5 CAL/CM2 | 82% | CAT 2 |
| Armura Shield | Aramida 4,5 Oz | 150 G/M2 · 4,5 OZ/Y2 | 93% meta-aramid · 5% para-aramid · 2% antistatic | 1% warp · 1% weft | 4 CAL/CM2 | — | CAT 1 |
| Armura Arc-Pro | Techs Alexandra 2112 | 240 G/M2 · 7 OZ/Y2 | Lenzing FR 64% · meta-aramid 30% · para-aramid 5% · antistatic fibre 1% | 3% warp · 3% weft | 12 CAL/CM2 | — | CAT 2 |