GOLDEN
- Waistband cut in 100% cotton drill
- Pocket cut in 100% cotton drill
- Type A reflective tape
- Domestic metal zipper
- Domestic snaps
Back to Uniforms 
Hover over the photo to zoom in Download data sheet Manufacturer PDF, with construction detail and the fabric table
Hover over the photo to zoom inTechnical data sheet
Superior Drill Technician Coverall
WORKWEAR Cotton and blends for general industrial work. These are not flame-resistant fabrics.
Fabric color
Request a quote The photos show the cut of the garment. The fabric is chosen from the table below: the same cut is made up in any of them.
On-screen colors are for reference only and may vary with the fabric batch.
Construction
Construction detail as declared on the manufacturer’s technical data sheet.
- Long or short sleeve
- Eight pockets, laid out as follows:
- Two chest pockets with flap and snap
- Two front trouser pockets with false pocket and snap
- Two rear trouser pockets, one with snap
- One vernier pocket on the left leg
- One pen pocket on the left sleeve
- Rear pockets are reinforced
- One-piece back with piping
- Elastic all around the waist
- Straight sleeve cuff
- Sport collar
- Front nylon zipper, double slider
- Reflective tape, 1” or 2”, on arms and legs
- Concealed metal snaps on pockets, collar and cuffs
- Sewn with 3-ply thread for stronger seams
- Double stitching with bar tacks at the highest-stress areas
- Embroidery to order, direct or patch type
Finish levels
The same garment with different hardware and waistband/pocket fabrics. The level is chosen when quoting.
Available fabrics
Values declared by the manufacturer on the garment’s technical data sheet.
| Fabric | Weight | Composition | Shrinkage % |
|---|---|---|---|
| DRIL 100% ALGODÓN | 250 G/M2 · 7,5 OZ | 100% cotton | 3.0 warp · 3.0 weft |
| DRIL BORNEO | 235-240 G/M2 · 7,5 OZ | 65% polyester · 35% cotton | 3-4% |
| DRIL NORUEGO | 190 G/M2 · 7,5 OZ | 80% polyester · 20% cotton | 3-4% |