PLATINIUM DIELÉCTRICA
- Waistband cut in FR fabric
- Pocket cut in FR fabric
- Type A reflective tape
- Polyamide-tooth zipper with aramid tape
- Polyamide snaps
Back to Uniforms 
Hover over the photo to zoom in Download data sheet Manufacturer PDF, with construction detail and the fabric table
Hover over the photo to zoom inTechnical data sheet
Flame-Resistant Technician Coverall
FIRE · COMFORT / PROTECTION FR fabrics with an ATPV value declared on the manufacturer’s data sheet, for operations exposed to flame or electric arc.
Fabric color
Request a quote The photos show the cut of the garment. The fabric is chosen from the table below: the same cut is made up in any of them.
On-screen colors are for reference only and may vary with the fabric batch.
Construction
Construction detail as declared on the manufacturer’s technical data sheet.
- Long or short sleeve
- Six pockets, laid out as follows:
- Two chest pockets with flap and snap
- Two front trouser pockets, no false pocket
- Two rear trouser pockets, one with snap
- Rear pockets are not reinforced
- Split back with piping
- Elastic all around the waist
- Straight sleeve cuff
- Sport collar
- Front antistatic brass zipper with aramid tape
- Reflective tape, 1” or 2”, on arms and legs
- Concealed metal snaps on pockets, collar and cuffs
- Sewn with 3-ply thread for stronger seams
- Double stitching with bar tacks at the highest-stress areas
- Embroidery to order, direct or patch type
Finish levels
The same garment with different hardware and waistband/pocket fabrics. The level is chosen when quoting.
GOLDEN
- Waistband cut in FR fabric
- Pocket cut in FR fabric
- Type A reflective tape
- Flame-resistant metal zipper
- Antistatic snaps
SILVER
- Waistband cut in 100% cotton drill
- Pocket cut in 100% cotton drill
- Type A reflective tape
- Domestic metal zipper
- Domestic snaps
BRONCE
- Waistband cut in Norwegian/Borneo drill
- Pocket cut in sabana versátil fabric
- Type B reflective tape
- Domestic metal zipper
- Domestic snaps
Available fabrics
Values declared by the manufacturer on the garment’s technical data sheet.
| Fabric | Weight | Composition | Shrinkage % | ATPV | HAF | Risk | Burn % |
|---|---|---|---|---|---|---|---|
| DRILL FR | 260 G/M2 · 7.8 OZ | 100% FR cotton | 3.0 warp · 3.0 weft | CAL/CM 9 / 11 | 74,7% | 2% | 2% |
| DRILL FR | 250 G/M2 · 7,5OZ | 88% FR cotton · 12% polyamide | 3.0 warp · 3.0 weft | CAL/CM2 9,3 / 11 | 77% | 1% | 1% |
| DRILL FR | 260 G/M2 · 7,7OZ | 99% FR cotton · 1% antistatic | Warp 10% | CAL/CM2 11 | 81% | 89% | 11% |
| NOMEX SYNERGY PRO | 230 G/M2 · 4,5 / 6 OZ | 93% Nomex · 5% Kevlar · 2% carbon fibre | 3.0 warp · 3.0 weft | CAL/CM 8,5 | 82% | 2% | 12% |
| ARAMIDA | 4.5OZ/Y2 · 150GRS/M2 | 93% meta-aramid · 5% Kevlar · 2% antistatic | Warp 1% | CAL/CM2 4 | 70% | 1% | 1% |
| LENZING FR | 240G/M2 | Lenzing FR 64% meta-aramid · 30% para-aramid · 5% antistatic fibre 1% | Warp 800 | CAL/CM2 12 | 83% /85% | 15% | 15% |